Selected:

Through the Roof! Can Quart Lower VOC

$173.94 Case of 6

Through the Roof! Can Quart Lower VOC

$173.94 Case of 6

Is this your story, too? “I have sealed this same leak four times with roofing tar and each time, the leak returns.”* Make persistent leaks and repeated repairs a thing of the past. Get Through the ROOF!®. This ultra-clear roof, gutter, and flashing caulk goes on easy and remains elastic year after year to permanently seal those nagging leaks. It can even be applied in the middle of a rain storm! It’s proven to last 20 times longer than roof cement. Just say NO to leaks and repeated repairs and change your tune to “Five year leak GONE!*”

SKU: 14003FSD16A1-1 Categories: ,

Description

Features

•  Permanently fixes nagging leaks: Proven to last 20 times longer than asphalt. Remains elastic and water-tight year after year.
•  Do repairs today, even in a rain storm: Sticks to surfaces wet or dry, in temperatures down to 0⁰ and up to 120⁰F.
•  Repairs stick, but don’t stick out: Tenacious adhesion to a wide variety of roofing materials and won’t discolor them. Goes on crystal clear and stays clear.
•  Easy to use: Easy to apply for professional-looking results every time.
•  OK to leave in your unheated garage overnight: Through the ROOF!® won’t freeze.

CA residents only: Low VOC formula of the 1 qt. and 1 gal. brush-on grade is available and required in the state of CA.

 

For repairs that stick, but won’t stick out, use Through The ROOF! on common roofing fixtures and materials, including:

  • Flashing
  • Gutters
  • Vents
  • PVC & ABS vent pipe
  • Skylights
  • Ductwork
  • Chimneys
  • Brick/block/mortar
  • Shingles & shakes
  • Roof jacks, cables and air conditioning units

Adheres to most roofing materials, including:

Metals
Aluminum • Brass • Steel • Anodized Windows

Plastics
ABS • Nylon • PVC • Acrylic Sheet • Plexiglass • Urethane • Fiberglass • Polycarbonate • Vinyl • Lexan®* • Polystyrene

Other Surfaces
Asphalt • Stone • Brick • Fiber Cement • Stucco • Tile • Concrete • Glass • Wood • Porcelain • Mortar

Don’t see your surface listed? Contact Customer Service.

Do Not Use:

  • In areas of submersion or frequent, prolonged puddling
  • With polystyrene insulation
  • In containment applications
  • Plastics not listed should be tested for compatibility before use
  • Will not adhere to or is incompatible with Aquaseal®, Kynar®, polypropylene,polyethylene, silicone, Styrofoam® (it dissolves it), Teflon®, waxes

Special Notes:

  • CA residents only: Low VOC formula of the 1 qt. and 1 gal. brush-on grade is available and required in the state of CA.

Aquaseal®, Kynar®, Teflon®, Styrofoam® Lexan® are registered trademarks of their respective owners.

Additional information

Weight 12.5 lbs
Close Menu
×
×

Cart